Visit the John Deere website for more information on the JD 315 Skid Steere Productivity 45 net horsepower turbocharged 4-cylinder Deere diesel certified to EPA interim Tier 4 emissions. Smooth and quiet turbocharged four-cylinder Deere diesel delivers exceptional reliability, power, and torque. Radial boom design delivers excellent reach through the "work zone" - for loading pickup trucks, placing pallets and loading hoppers. Optimal 60/40 weight distribution, low center of gravity, and high ground clearance deliver unsurpassed balance and agility. Only 5-feet wide for work in confined areas. Or opt for the 7 x 15 tires and 56-inch bucket and pass through even narrower openings. Quick-Tatch™ hitch accommodates a wide variety of Worksite Pro™ attachments Comfort Industry's best visibility includes a clear line of sight to the cutting edge, bucket corners, Quick-Tatch™ coupler, sides to the tires, rear corners, and directly behind. Sculpted seat, ergonomically integrated armrests, and adjustable foot pedals provide day-long comfort and support. "Newly designed" Smooth and responsive low-effort controls maximize comfort, minimize fatigue. Enhanced overhead instrument panel includes an electronic monitor with diagnostic capability and easy-to-operate sealed switches. Optional four-season cab with heater. Uptime/Service 500-hour engine oil, 3-micron hydraulic, and 5-micron fuel filters provide extra protection Serpentine belt, hydraulic valve lifters, and wet-disc park brakes never need adjustment. Enhanced cooling system provides increased heat rejection for superior performance in extreme conditions. Hinged rear door and top hood provide wide-open access. Daily color-coded checkpoints and refueling are convenient and quick. Specifications
| |
| |
| |
| MANUFACTURER |
John Deere |
| |
| MODEL |
315 Skid Steer |
| |
| DATE OF SPECIFICATION |
Oct-07 |
| |
| ENGINE |
|
| |
| Manufacturer |
John Deere |
| |
| Model |
4024T |
| |
| Gross Horsepower (kw) |
49 (37) |
| |
| Net Horsepower (kw) |
45 (34) |
| |
| Rated RPM |
2400 |
 |
| Grosspeak Torque, lb-ft (nm) |
139 (188) |
| |
| #Cylinders |
4 |
| |
| Displacement, cuin(L) |
149 (2.4) |
| |
| Engine aspiration |
Turbocharged |
| |
| Fuel Capacity, gal (L) |
18 (66) |
| |
| HYDRAULIC SYSTEM |
|
| |
| Standard Pump Flow, gpm (L/min.) |
16 (61) |
| |
| Optional High Flow, gpm (L/min.) |
25 (95) |
| |
| System Pressure, PSI (KPA) |
3450 (23770) |
| |
| Auxiliary Hydraulic Circuit, Std; Opt |
Std |
| |
| Hydraulic power, calculated, hp (kw) |
32.2 (24.0) |
| |
| Opt High-Flw Hyd pwr,calculated,hp(kw) |
50.3 (37.7) |
| |
| PERFORMANCE |
|
| |
| SAE Rated Oper Cap (ROC), lb (kg) |
1,500 (680) |
| |
| SAE ROC with opt Counterweight, lb (kg) |
1,650 (748) |
| |
| Tipping Load, standard, lb (kg) |
3,000 (1361) |
| |
| Boom, lb(kn) |
3,900 (17.3) |
| |
| Bucket, lb(kn) |
3,300 (14.6) |
| |
| Heaped Bucket Capacity, cu ft (cum) |
Not published |
| |
| Reference Bucket Width, in (mm) |
60" (1520) |
| |
| Self leveling bucket, Opt |
Opt |
| |
| DRIVE TRAIN |
|
| |
| Maximum Grnd Speed,stand,mph (kph) |
6.8 (10.9) |
| |
| Two Speed Trans Grnd Speed,mph(kph) |
Not applicable |
| |
| Drive chain size |
80 HZ |
| |
| Axle torque, lb-ft (nm) |
4,050 (5491) |
| |
| Standard Tire Size |
10x16.5 |
| |
| DIMENSIONS |
|
| |
| Length with Bucket, in (mm) |
129" (3280) |
| |
| Length Without Bucket,in (mm) |
101" (2570) |
| |
| Width Without Bucket, in (mm) |
59" (1500) |
| |
| Height to ROPS, in (mm) |
77" (1960) |
| |
| Height to Hinge Pin, in (mm) |
115" (115) |
| |
| Dump Height, in (mm) |
89" (2260) |
| |
| Dump Reach, in (mm) |
15.8" (400) |
| |
| Dump Angle, degrees |
40º |
| |
| Bucket Rollback @ ground, degrees |
30º |
| |
| Wheelbase, in (mm) |
41" (1040) |
| |
| Ground Clearance, in (mm) |
7.6" (193) |
| |
| Angle of Departure, degrees |
23.5º |
| |
| OPERATING WEIGHT, STANDARD LB (kg) |
5,200 (2359) |
| |
| |
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. |
|
|
|
|